- Factory reconditioned
- /CREALITY 3D Ender 5 S1 3D Printer FDM 3D Printing Machine with Sprite Dual Gear Direct Extruder and CR Touch Auto Leveling 220x220x280mm Printing Area 250mm/s Fast Print Speed with 4.3'' Color Touchscreen and PC Spring Steel Sheet Suitable for PLA PETG ASA HIPS Filament
CREALITY 3D Ender 5 S1 3D Printer FDM 3D Printing Machine with Sprite Dual Gear Direct Extruder and CR Touch Auto Leveling 220x220x280mm Printing Area 250mm/s Fast Print Speed with 4.3'' Color Touchscreen and PC Spring Steel Sheet Suitable for PLA PETG ASA HIPS Filament
Choose your country:
🔝 Stable Frame Underpins Quality: An all-metal cube frame goes with the classic Cartesian structure. The stability is enhanced by thick linear shafts, extra gussets, two cantilevers, and silicone bed mounts. It ensures a 100% success rate for 1,000h printing at 250mm/s.
🔝 Clog-free Direct Extrusion at 300℃: The “Sprite” dual-gear direct extruder delivers a strong 80N extrusion force. The hotend features a titanium heatbreak blocking heat creep, a corrugated heatsink for rapid cooling, and a 50mm³ large melting chamber to fully melt the filament. It can print PLA, TPU, PETG, ABS, and more, clog-freely for 1,000 hours.
🔝 Cool Down Model Promptly: The special "Urus" air ducts channel the strong wind generated by a large S015 fan to cool the freshly printed section directly. The deposited hot material will harden and bond up immediately, thus less drooping or warping caused by overheating. It gives better overhangs, bridges, and more details overall.
🔝 Auto-leveling and Smart Sensors: The CR Touch probe realizes fully-automatic precise 25-point bed leveling. The Z-offset can be adjusted at 0.05 accuracy with touch control. It also has a filament runout sensor and power loss recovery to factor in accidental moments. It is a tool to always count on.
🔝 Bendable PC Surface and Greater Ease: The PC spring steel sticks to the first layers firmly, enables print removal with a slight bend, and its magnetic base with 2 notches allow quick snap-on. Also, easy to use with 4.3in color touchscreen, USB-C cable printing, modular design, aviation connector, and tidy wire harness sleeve.
Model: Ender 5 S1 3D Printer
Build Volume: 220*220*280mm
Product Dimensions: 425x460x570mm
Net Weight: 12.1kg
Extruder Type: "Sprite" dual-gear direct drive extruder
Extruder Material: All metal
Leveling Mode: CR Touch auto-leveling
Mainboard: 32-bit silent mainboard
Display Screen: 4.3 inch color touchscreen
Max. Printing Speed: ≤250mm/s
Typical Printing Speed: ≤120mm/s
Nozzle Type: Brass nozzle x1
Nozzle Diameter: Standard 0.4mm
Printing Accuracy: ±0.1mm
Layer Height: 0.05-0.35mm
Filament Diameter: 1.75mm
Nozzle Temperature: ≤300°C
Heatbed Temperature: ≤110°C
Build Surface: PC spring steel sheet
Power Loss Recovery: Yes
Filament Runout Sensor: Yes
Rated Voltage: 100-120V~, 200-240V~, 50/60Hz
Rated Power: 350W
File Transfer: TF card, USB Type-C cable
File Formats: STL, OBJ, AMF
Supported Filaments: PLA, PETG, ABS, TPU, PC, ASA, HIPS
Slicing Software: Creality Slicer, Creality Print, Cura, Repetier-Host, Simplify3D
UI Languages: "English, Spanish, German, French, Russian, Portuguese, Italian, Turkish, Chinese"
Package Weight: 14.7kg/2.2lb
Package Dimensions: 528x474x340mm/20.7x18.6x13.3in
1 x Ender 5 S1 3D Printer Kit
Ask a new question
please Enter your Name
Please enter a valid email address.
You've entered the wrong email format!
Please enter the content
Please enter a 5-3000 characters.